Smeg Stove User Manual page 16

Booster function
The booster function allows you to
activate the cooking zone at
maximum power as long as 10
minutes. It can be used to bring a
large quantity of water to a boil
rapidly or to broil meat.
• Turn the knob clockwise to the P position
for two seconds and then release. The
display shows the symbol
minutes the booster function will
automatically be disabled and cooking
will continue at power level 9.
The booster function has priority
over the heating accelerator
function.
Power management
The hob is fitted with a power management
module that optimises/limits consumption. If
the overall set power levels surpass the
maximum limits permitted, the electronic
circuit board manages automatically the
power supplied by the hot plates.
The module tries to maintain the maximum
deliverable power levels. The levels set by
the automatic management will appear on
the display.
The flashing of a power level indicates that
it will automatically be limited to a new level
selected by the power management
module.
18
Use
. After 10
Control lock
1. While all the cooking zones are off,
simultaneously turn the two cooking zone
control knobs anti-clockwise to the left
(position A).
2. Keep them turned until the symbols
appear on the display.
3. Release the knobs.
In order to remove the control lock repeat
the same operations previously described.
Priority is given to the last zone set.
The control lock is a device that
protects the appliance from
accidental or inappropriate use.
If the knobs have been kept turned
to the A position for more than 30
seconds a fault message appears
on the display.