Using In-Call Options - Sharp FX PLUS Series User Manual

Using In-Call Options

When a call is in progress, the following options are available:
Bluetooth When a Bluetooth device is paired and connected to your phone, you can conduct all calls using Bluetooth
for hands-free conversation. When using Bluetooth headset during a call, the current call screen has a blue
border and the Ongoing Call icon turns blue in the Status bar.
Tap
Mute You can unmute the microphone by tapping
Speaker You can turn the speakerphone off by tapping the
The speaker is turned off automatically when your current call ends.
Add call Tap to dial another call if your network supports this service. The current call will be put on hold.
Dialpad Tap to enter additional numbers during your call.
You can search for contacts during a call.
Menu > Contacts
You can place the current call on hold at any point during a conversation.
Menu > Hold
When you put a call on hold, the Status bar displays the
Menu > Noise Noise suppression
suppression off Noise
NOTE
To avoid damaging your hearing, do not hold the phone up to your ear when the speakerphone is on.
Bluetooth to toggle in-call audio to and from the Bluetooth accessory.
helps to eliminate noise during a call. Tap
suppression.
Mute again.
Speaker again.
. Tap
Menu >Noise suppression off
37
Menu >Unhold to resume the call
to turn
.