Battery - Sharp FX PLUS Series User Manual

Battery

Note that browsing the web frequently, extended data usage, being in a poor signal area, or subjecting the device to extreme
temperatures will cause the battery to discharge quickly. To increase battery life, limit your data usage, or turn off Wi-Fi, GPS,
and Bluetooth when not required.
Installing the battery
Please use only the original batteries and accessories you received with your phone or Sharp recommended replacements.
1. Remove the battery cover by sliding it down.
2. Align the battery's exposed gold contacts with the battery connectors
inside the battery compartment.
3. Insert the contact side of the battery first and then gently push the
battery into place.
4. Replace the battery cover by setting it to the back of the phone and
sliding it into its place.
Removing the battery
1. Make sure that your device is turned off, and then remove the battery cover.
2. Lift up on the plastic battery tab to remove the battery.
Charging your battery
Before you turn on your device and start using it, it is recommended that you charge the battery.
1. Plug the USB cable into the USB power adapter.
2. Plug the power adapter into a standard outlet.
3. To access the USB port located on the left side of your device, gently open the USB flap.
4. Plug the other end of the USB cable into the phone's micro USB port.
5. The USB icon on the cable should always face up when connecting the cable
to your device as shown.
NOTE
10