Transmission Oil Replacement - Yamaha YP250 Service Manual

Motorcycle yp250 4uc-ae1
Hide thumbs Also See for YP250:
Table of Contents

Advertisement

ENGINE OIL PRESSURE INSPECTION/

TRANSMISSION OIL REPLACEMENT

D Start the engine after solving the problem(s),
and recheck the oil pressure.
D Tighten the oil check bolt to specification.
10 Nm (1.0 mSkg)
CAUTION:
D Start the engine and check the oil pres-
sure with the oil check bolt loosened.
D Do not apply at high speeds more than
specified when checking the pressure.
NOTE:
Wipe any spilled oil off the engine.
*****************************************************
YP******
TRANSMISSION OIL REPLACEMENT
NOTE:
Make sure the scooter is upright when replacing
the oil.
1. Stand the scooter on a level surface.
2. Start the engine for several minutes to
warm it up and then stop.
3. Place an oil pan under the crankcase.
4. Remove:
D Oil filler cap
D Drain bolt 1
Drain the oil.
5. Tighten:
D Drain bolt
6. Fill:
D Crankcase
Recommended oil:
SAE 10W30 motor oil
Oil quantity:
0.25 L
CAUTION:
Wipe any spilled oil off the tire or the wheel.
3-18
INSP
ADJ
22 Nm (2.2 mSkg)

Advertisement

Table of Contents
loading

Table of Contents