FRONT FORK
2. Remove:
S Inner tube
S Oil lock pice
3. Remove:
S Oil seal 1
CAUTION:
Never reuse the oil seal.
2 Rag
YP703030
FRONT FORK INSPECTION
1. Inspect:
S Inner tube bending
Inner tube bending limit:
0.2 mm
Scratches/bends/damage ! Replace.
Do not attempt to straighten a bent inner
tube as this may dangerously weaken the
tube.
2. Measure:
S Fork spring a
Front fork spring free length:
268.5 mm
<Wear limit>
263.5 mm
Over the specified limit ! Replace.
YP******
FRONT FORK ASSEMBLY
Reverse the "DISASSEMBLY" procedure.
Note the following points.
1. Install:
S Damper rod 1
S Rebound spring
S Oil lock piece 2
S Inner tube 3
7-26
CHAS