Description Of The Controls; Troubleshooting - Smeg DISHWASHER Instruction Manual

User instructions

1. Description of the controls

1.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2
Illumination of this light denotes the program selected and the occurrence of
a fault (troubleshooting).
PROGRAM SELECTION BUTTON
3
By pressing this button in sequence it is possible to select the desired
program.
SALT WARNING LIGHT (certain models only)
4
Illumination of this light signals that salt container is empty.
RINSE AID WARNING LIGHT (certain models only)
5
Illumination of this light signals that rinse aid dispenser is empty.
SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.