Recording On A Cassette Tape - Sharp CD-MPS600W Operation Manual

Mini component system
Table of Contents

Advertisement

CD-MPS600W
CD-MPS700W
Recording on a cassette tape (continued)
CD-MPS800W
ENGLISH
! Recording from the radio
1
Tune in to the desired station (see page 26).
2
Load a cassette into the TAPE 2 cassette compartment
with side A facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button to choose one side or both sides.
... To record on both sides.
... To record on only one
side.
4
Press the
button.
Recording will be paused.
5
Press the
/
button to record on side A, or the
for side B.
To record on both sides, begin with side A. (If recording is start-
ed from side B, the tape will not switch over to side A.)
To interrupt recording:
Press the
button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the
button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
E-34
! Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the TAPE 1 cassette com-
partment. Insert a blank tape into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
until "TAPE 1" appears on the
display.
The reverse mode will be set to " ".
4
Press the
button.
Recording will be paused.
5
button
Press the
/
button to start dubbing.
To stop dubbing:
Press the
button.
TAPE 1 and TAPE 2 will simultaneously stop.
! Erasing recorded tapes
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1
2) button until "TAPE 2" appears on the dis-
play.
3 Set the
button to " " to erase only one side and to " " to
erase both sides.
4 Press the
button.
5 Press the
/
button to erase side A, or the
side B.
To erase both sides, begin with side A. (If erasing is started from
side B, the tape will not switch over to side A.)
Note:
Make sure that the TAPE 1 is not in use.
04/2/9
CD-MPS800W(Z)E4.fm
2) button
button to erase
TINSZA063AWZZ

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd-mps700wCd-mps800w

Table of Contents