General Control - Sharp CD-G7500V Operation Manual

General control

CD-G7500V
CP-G7500
ENGLISH
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
E-17
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the vol-
ume will decrease.
Remote control operation:
Press the VOL (+ or -) button to increase or decrease the volume.
! Bass control (X-BASS)
When the power is first turned on, the
unit will enter the extra bass mode which
emphasises the bass frequencies, and
"X-BASS" will appear. To cancel the ex-
tra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
In CD/Video CD/TUNER/TAPE In GAME/VIDEO mode
mode
The sound is not
FLAT
modified.
Bass and treble are
ROCK ROCK
emphasised.
CLASSIC Treble is cut a little. CLASSIC
Bass and treble are
ACTION
POPS
slightly emphasised.
Vocals (midrange
SPORTS
VOCAL
tones) are emphasised.
Treble is slightly
RACING
JAZZ
emphasised.
Note:
If the EQUALIZER (EQUALIZER MODE) button is pressed in the
extra bass mode, it will be cancelled automatically.
04/3/23 CD-G7500V(Z)E2.fm
1
0 .....
30 MAXIMUM
The sound is not
FLAT
modified.
Bass and treble
are emphasised.
Treble is cut a
little.
Bass is empha-
sised.
Vocals and treble
are emphasised.
Bass and treble are
emphasised more.
TINSZA101AWZZ