Memorising A Station; To Recall A Memorised Station - Sharp CD-E110H Operation Manual

Listening to the radio (continued)
CD-E110H
ENGLISH

! Memorising a station

This may be operated only with the remote control.
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 16.
2
Press the MEMORY button to
enter the preset tuning sav-
ing mode.
3
Within 5 seconds, press the TUNER PRESET (
ton to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the
MEMORY button to store that
station in memory.
If the preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.

! To recall a memorised station

Press the TUNER PRESET (
sired station.
E-17
Listening to a cassette tape
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
or ) but-
or ) button to select the de-
03/1/21 CD-E110H(H)E2.fm