Playback Of A Video Cd (Cds) Without P. B. C. (Version 1.1) - Sharp CD-BK260V Operation Manual

Playback of a Video CD (CDs) without P. B. C. (Version 1.1)

1
Turn on the TV and set the input selector to "VCR".
2
Press the ON/STAND-BY button to turn the power on.
3
Press the CD/VIDEO CD (CD) button.
E-19 ENGLISH
Sound Control (See page 13.)
4
Press the OPEN/CLOSE button to open the disc tray.
5
Place the video CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the video CD in the open position.
" Video CDs can be placed in any open position in the disc tray.
" Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions.
6
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks on the vid-
eo CD whose number is flashing
7
To select the video CD you want to listen to first, press the DISC
SKIP button.
8
Press the ( /SELECT/RESUME) button to start playback.
" Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
" When the last track on the third disc has finished playing, the unit will stop au-
tomatically.
" When there is no video CD in one of the disc 1 - 3 positions, the next video
CD will be played.
Notes:
" During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the 1 - 3 buttons on the remote control.
" Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
the remote control.
01/4/26 CD-BK260V(S)E2.fm
Total playing time of the video CD
whose number is flashing
1 - 3 buttons on