Repeat Or Random Play - Sharp CD-BK260V Operation Manual

" To change the display
Whilst in the stop mode or playback mode, press the MP3 DISPLAY button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
Total number of tracks
Track name
[When in the playback mode]
Track Elapsed playback time
number
Track name

Repeat or Random Play

" Repeat Play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
To repeat a desired track:
Perform steps 1 - 5 in the "Programmed Play" section (page 31) and then press the
( /SELECT/RESUME) button twice.
To cancel repeat play:
Folder name
Press the (
" " will go out.
" Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
Folder name
To cancel random play:
Press the
Notes:
! If you press the NEXT
selected next by the random operation. On the other hand, the
does not allow you to move to the previous track. The beginning of the track being
played will be located.
! In random play, the unit will select and play tracks automatically. (You cannot select
the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
Otherwise, the disc(s) will play continuously.
( /SELECT/RESUME) button twice.
/SELECT/RESUME) button again.
/SELECT/RESUME button.
button during random play, you can move to the track
01/4/26 CD-BK260V(S)E3.fm
PREV. button
( /RETURN) button.
ENGLISH E-30