Playback Of A Video Cd (Cds) Without P. B. C. (Version 1.1) - Sharp CP-BP99V Operation Manual

Playback of a video CD (CDs) without P. B. C. (Version 1.1)

1
Turn on the TV and set the input selector to "VCR".
2
Press the ON/STAND-BY button to turn the power on.
3
Press the CD/VIDEO CD (CD) button.
4
Press the OPEN/CLOSE button to open the disc tray.
All manuals and user guides at all-guides.com
5
Place the video CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the video CD in the open position.
! Video CDs can be placed in any open position in the disc tray.
! Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions.
6
Press the
Total number of tracks on the
video CD whose number is flashing
7
To select the video CD you want to listen to first, press the DISC
SKIP button.
8
Press the
! Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
! When the last track on the third disc has finished playing, the unit will stop au-
tomatically.
! When there is no video CD in one of the disc 1 - 3 positions, the next video
CD will be played.
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the ( /RETURN) button.
To remove the video CDs:
Whilst in the stop mode, press the
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
General control (See page 10.)
OPEN/CLOSE button to close the disc tray.
Total playing time of the video CD
whose number is flashing
/ ( /SELECT/RESUME) button to start playback.
/SELECT/RESUME button.
OPEN/CLOSE button.
ENGLISH
01/7/13 CD-BP99V(X)E2.fm
CD-BP99V
E-16