Last Number Redial List; Opening Lists With The Message Key - Siemens Gigaset C580 User Manual

Using the directory and lists
Copying a displayed number to the
directory
You can copy numbers displayed in a list, e.g.
the calls list or redial list, to the directory.
A number is displayed:
¢
§Menu§
Copy to Directory
¤
Complete the entry
Using a number from the directory
In some operating situations you can open
the directory to copy a number, for example.
Your handset need not be in idle status.
s
Open the directory.
q
Select entry.
§Menu§
Press the display key.
Select function with q.

Last number redial list

The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers is
in the directory, the corresponding name
will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialled.
Managing entries in the last
number redial list
c
Press the key briefly.
s
Select entry.
§Menu§
Open menu.
The following functions can be selected with
q:
Use Number (as in the directory,
¢
page 23)
24
¢
page 22.
Copy to Directory
Copy an entry to the directory
¢
( page 22).
Delete Entry (as in the directory,
¢
page 23)
Delete List (as in the directory,
Opening lists with the
message key
You can use the message key f to open
the following list selection:
u
network mailbox, if your network pro-
vider supports this function and the fast
access is set for the network mailbox
¢
( page 28).
u
Call history
The message key f will flash as soon as a
new entry is received in a list (switches off
when the key is pressed). The message You
have new messages appears in the display
in idle status.
Please note
If calls are saved in the network mailbox,
you will receive a message if the appro-
priate settings have been made (see your
network provider user guide).
List selection
The lists displayed after pressing the mes-
sage key f depend on whether there are
any new messages.
f key does not flash (no new mes-
sages):
Select a list with q. To open, press
f key flashes (new messages received):
You see all the lists with new messages.
If only one list contains new messages, this
will be opened automatically.
¢
page 23)
§OK§
.