Preparing To Use Your Phone; Installing The Base Station - Siemens Gigaset SL100 Instructions Manual

IMPORTANT NOTICE: Under power failure conditions, this telephone
◆
may not operate. Please ensure that a separate telephone, not
!
dependent on local power, is available for emergency use.
WARNING: This equipment may not provide for the effective hand-
◆
over of a call to another device connected to the same line.
i
Not all of the functions described in these instructions are available in all
countries.

Preparing to use your phone

The pack contains:
a base station Gigaset SL 100,
◆
a SL 1 handset,
◆
one power supply unit with power cord,
◆
two telephone cords, one telephone cord for use in New Zealand and one for use in
◆
Australia,
one belt clip for the handset,
◆
one rechargeable battery,
◆
one charger (incl. power supply unit),
◆
one set of operating instructions.
◆

Installing the base station

Hints on installing
The base station is designed to be operated in enclosed, dry areas at temperatures rang-
ing from +5 °C to +45 °C. Install the base station at a central location in your home, e. g.
in the hall.
Never expose the telephone to: heat sources, direct sunlight, other
◆
W
electrical appliances.
Protect your Gigaset from moisture, dust, corrosive liquids and
◆
vapours.
Range and signal strength
The base station has a range of approx. 300 m outdoors and up to 50 m indoors. The
signal strength display shows the quality of the radio contact between the base station
and the handset:
Ð
Signal strength 100%
Ñ
Signal strength 50%
|
no signal (flashes)
Preparing to use your phone
i
Signal strength 75%
Ò
low signal strength
6