Aquos Link Connection; Connecting An Aquos Bd Player Via The Aquos Link-Compatible Audio System; Connecting An Aquos Bd Player Only; Aquos Link Setup - Sharp AQUOS LC-37A65M Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC
protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player via the
AQUOS LINK-compatible audio system
HDMI-certifi ed cable
HDMI-certifi ed cable
AQUOS BD Player

AQUOS LINK Setup

AQUOS LINK Auto power on

If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "AQUOS LINK Setup",
3
and then press ENTER.
Optical fi bre
cable
AQUOS LINK-compatible
audio system
• The factory default for this item is "Off".
Connecting an AQUOS BD Player
only
HDMI-certifi ed cable
Press a / b to select "Auto Power On", and
4
then press ENTER.
Auto Power On
Selecting Recorder
Press c / d to select "On", and then press
5
ENTER.
Press MENU to exit.
6
NOTE
AQUOS BD Player
Setting auto power on by AQUOS LINK
On Off
41