Supplied Accessories; Quick Guide; Attaching The Stand - Sharp Aquos LC-32RD1E Operation Manual

Supplied accessories

Remote control unit (g1)
Pages 5 and 6
Cable clamp
(Smallg1, Largeg1)
Page 4
• "AAA" size battery (g2) ...... Page 5

Quick guide

Attaching the stand

Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely flat. This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 8 screws supplied with the TV.
Short screws (m4)
(used in step 2)
3
Insert the stand into the opening on the bottom of
the TV.
NOTE
• To detach the stand, perform the above steps in reverse order.
AC cord (g1)
Product shape varies in
some countries.
Page 4
3 RCA to 15-pin D-sub
adapter (g1)
Page 9
• Operation manual (This publication)
Long screws (m4)
(used in step 4)
2
Attach the two parts of the stand unit to each other
using the 4 short screws as shown.
4
Insert and tighten the 4 long screws on the rear
of the TV as shown.
Cable tie (g1)
Page 4
Stand unit (g1)
Page 3
3