Sharp Aquos LC-108D1U Operation Manual page 10

QUICK REFERENCE
When transporting the LCD Monitor
Transporting the LCD Monitor requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves.
Ventilation & Cleaning Tips
Keep your LCD Monitor in a well ventilated area and make sure not to place it by a heat source or use it near
water. The LCD Monitor is designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth (supplied) with water to lightly moisten.
Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same
method. Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1
Connect the AC plug for the LCD Monitor into
the AC outlet.
• AC cord enclosed in this product is for 200-240V.
When installing the LCD Monitor, ask qualifi ed
service personnel.
Be sure to turn OFF the main POWER on the rear
of the LCD Monitor when connecting the cord.
Fix the AC cord as shown below.
1 Insert the tip of the band into the hole for the
AC cord clamp.
2 Insert the AC plug into the AC INPUT terminal.
3 Fasten the AC cord clamp.
4 Slide the fastened part toward the AC INPUT
terminal.
AC outlet
• Place the LCD Monitor close to the AC outlet, and keep
the power plug within reach.
• This product must only be connected to a 200-240 V,
50/60 Hz, grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
8
2
How to turn on the LCD Monitor for the fi rst time.
A) Push and turn ON the main POWER on the
B) Press POWER on the side of the LCD
1
2
3
C) The POWER indicator on the front of the LCD
4
• LCD Monitor angle cannot be adjusted.
rear of the LCD Monitor.
Monitor.
Monitor lights BLUE.
POWER indicator
Main
POWER
POWER