Appendix; Specifi Cations - Sharp AQUOS LC-32M450M Operation Manual

Appendix

Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem
• No power. • Check if you pressed POWER on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not • Is battery inserted with polarity (e, f) aligned? (See page 5.)
operate.
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light shining on the remote control sensor?
• Picture is cut off. • Is the image position correct? (See page 11.)
• Are screen mode adjustments such as picture size made correctly? (See pages 11,
13 and 14.)
• Strange colour, light colour, or • Adjust the picture tone. (See page 9.)
dark, or colour misalignment. • Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 8, 13.)
• Check the input signal setting. (See page 13.)
• Check the HDMI auto view setting. (See page 11.)
• Power is suddenly turned off. • The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See page 10.)
• Is the sleep timer set? (See page 5.)
• Sound/Picture is not stable or • Switch to an appropriate Sound/Colour system setting may improve the Sound/
no Sound/Picture colour noise Picture quality. (See pages 8, 13.)
occur.
• No picture. • Is the connection to external equipment correct? (See page 4.)
• Has the input signal setup been performed correctly after connection? (See page 13.)
• Is the picture adjustment correct? (See page 9.)
• Is the antenna connected properly? (See page 3.)
• Is "On" selected in "Audio only"? (See page 12.)
• No sound. • Is the volume too low? (See page 5.)
• The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and
cracking sound. contracts according to changes in temperature. This does not affect the TV's
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or
near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
Clearing the password
1
Repeat steps 1 to 2 in Setting a password. (See page 11.)
2
The password input screen displays.
3
If you enter "3001" using 0 – 9, the "Child lock" setting menu will be displayed.
4
Enter the 4-digit number as a password using 0 – 9. The new password is now set.
Possible Solution
Specifi cations
Model
Item
LCD panel
Resolution
Video Colour System
TV TV-Standard
Function
VHF/UHF
Receiving
Channel
CATV
TV-Tuning System
STEREO/BILINGUAL
Viewing angles
Audio amplifi er/Speakers
Terminals Antenna input
INPUT 1
INPUT 2/INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7 (PC input)
AUDIO OUT
USB
RS-232C
DIGITAL AUDIO OUTPUT Optical Digital Audio Output
Headphone
OSD language
Power Requirement
Power Consumption
without stand
Dimensions
with stand
Weight without stand (with stand)
Operating Temperature
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Optional accessory
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue
for compatibility and check the availability.
CAUTION
• This TV should be mounted on the wall only with the listed wall mount bracket. The use of other wall mount brackets may
result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
15 16
LC-32M450M
31.5o (800 mm) Advanced Super View & 40o (1016 mm) Advanced Super View &
BLACK TFT LCD BLACK TFT LCD
1,049,088 pixels (1366 g 768) 2,073,600 pixels (1920 g 1080)
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K NTSC: M
1
44.25 — 863.25 MHz
S1 — S41ch (including Hyperband)
Auto Preset 99 ch
NICAM: B/G, I, D/K A2 stereo: B/G
H : 176º V : 176º
10 W g 2 / 5 g 9 cm 2pcs
UHF/VHF 75 q DIN type
HDMI (HDMI input), AUDIO in ( 3.5 mm jack)
HDMI (HDMI input) / HDMI (HDMI input)
S-VIDEO in, VIDEO in, AUDIO in
VIDEO in, AUDIO in
AUDIO in, COMPONENT in
15 pin mini D-sub, AUDIO in (common use with INPUT 1) ( 3.5 mm jack)
AUDIO out ( 3.5 mm jack)
USB
9 pin D-sub male connector
3.5 mm stereo
English/Simplifi ed Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
AC 110 — 240 V, 50/60 Hz
106 W (0.8 W Standby) 199 W (0.6 W Standby)
792 (W) g 540 (H) g 113 (D) mm 980 (W) g 645.5 (H) g 114.5 (D) mm
792 (W) g 576 (H) g 242 (D) mm 980 (W) g 681 (H) g 314 (D) mm
8.7 kg (9.4 kg) 14.5 kg (15.5 kg)
0°C — 40°C
Part name
Wall mount bracket
(for LC-32M450M)
Wall mount bracket
(for LC-40M550M)
LC-40M550M
Model number
AN-37AG2 +
AN-37P30
AN-52AG4