Setup Menu; Analogue Channel Fine Tune; Screen Mode; Colour System - Sharp AQUOS LC-24LE430M Operation Manual

TV menu (Continued)

Analogue Channel Fine Tune

You can adjust the frequency to your desired position.
1
Go to "MENU" > "TV" > "Channels" > "Analogue
Channel Fine Tune", and then press ENTER.
2
Press a / b to select the channel you want
to fi ne tune, and then press ENTER.
3
Adjust the frequency by pressing c / d while
checking the background picture as a reference,
and then press ENTER to set.
Clear Channel List
Channel list will be reset to clear.
1
Go to "MENU" > "TV" > "Channels" > "Clear
Channel List", and then press ENTER.
2
Press c / d to select "OK", and then press
ENTER.

Colour System

You can change the colour system to one that is
compatible with the image on the screen.
1
Go to "MENU" > "TV" > "Channels"> "Channel
Scan", and then press ENTER.
2
Press a / b to select "Colour System".
3
Press c / d to select the optimum colour system
to receive. (Auto, PAL, SECAM, NTSC3.58,
NTSC4.43, PAL-60)
4
Press ENTER.
5
Press c / d to select "OK", and then press
ENTER.
NOTE
• If "Auto" is selected, colour system for each channel is
automatically set. If an image does not display clearly, select
another colour system (e.g. PAL, NTSC4.43).
10

Setup menu

Channels
Video Audio
OSD Language

Screen Mode

DPMS
Blue Mute
No signal off
No operation off
Time Setup
Teletext
DivX(R) Reg. Code
H OSD Language
Select from among 10 languages: English, French,
Portuguese, Arabic, Persian, Simplifi ed Chinese, Thai,
Vietnamese, Indonesian and Russian.
H Screen Mode
You can select different picture sizes that account for
the kind of each picture.
1
Press WIDE.
• The SCREEN MODE menu displays.
• The menu lists the wide mode options selectable for
the type of video signal currently received.
2
Press WIDE or c / d while the Screen Mode
menu displays on the screen.
• As you toggle down the options, each mode is
immediately refl ected on the TV.
Selected item
Full Full screen for both 4:3 and 16:9 pictures.
Normal Available for 4:3 pictures only. A side bar
appears on each side.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Auto Automatically adjusts the picture size.
4:3 picture on "Panorama"
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
H DPMS (Display Power Management Signals)
You can set the TV to automatically power off when no
image is displayed on PC. (On, Off)
If no signal inputs for approximately 40 seconds, the
power off.
When you start using the PC and the signal inputs
again, the TV turns on.
TV Setup Parental
English
Normal
Off
On
Disable
30min.
Description
4:3 picture on "Normal"