Reference Page 1. Disc Compartment; 1.; Disc Eject Button; Disc Play Or Pause, Tuning Up Button - Sharp XL-MP10H Operation Manual

1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
3
Press the CD EJECT button to open the disc compart-
ment.
4
Place the disc on the spindle, label
side up.
5
Close the disc compartment by firmly pushing the corner
marked "PUSH CLOSE".
[MP3]
Total number of tracks
[CD] [WMA]
Total number Total playing Total number of tracks
of tracks time
" Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
6
Press the
When the last track on the disc has finished playing, the unit will
stop automatically.
To interrupt playback:
Main unit operation:
Press the button.
To resume playback from the same
point, press the
Remote control operation:
Press the button.
To resume playback from the same point, press the
To stop playback:
Press the button.

MP3 track indicator

To remove the disc:
Whilst in the stop mode, press the
Caution:
" Do not play discs with special shapes (heart or octagon shaped)

WMA track indicator

as it may cause malfunctions.
" If a disc is damaged, dirty, or loaded upside down, "NO DISC"
will appear on the display.
" Keep foreign objects out of the disc compartment.
" Subjecting the unit to shock or vibration may cause mistracking.
" When the unit is not being used, be sure to close the disc com-
partment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
" If TV or radio interference occurs during disc operation, move the
unit away from it.
04/11/1
( ) button to start playback from track 1.

Disc play indicator

button again.
button.
CD EJECT button.
XL-MP10H(H)E1.fm
XL-MP10H
ENGLISH
8
E-10
TINSZA033SJZZ