Playing Audio Via Bluetooth - iHome iDM12 Instruction Manual

Playing Audio Via Bluetooth

1. Move the Bluetooth/Aux Switch to the Bluetooth position to listen to
audio streamed wirelessly from your paired iPad, iPhone, iPod or other
Bluetooth device.
2. Press and hold the Power Button to turn on the unit. The amber light will
flash as the unit searches for a previously paired device, and then turn
green when a previously paired device is detected.
3. Press the Play/Pause/Pairing Button to play or pause audio from your
Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode. It
does not control aux line-in devices.
4. Use the Volume +/- Buttons to adjust volume.
5. When done listening, press the Power Button to turn the unit off.
iDM12
Using the
5