Sleep Operation - Sharp XL-DK257NH Operation Manual

Timer and sleep operation (Remote Control only) (continued)
XL-DK257NH
ENGLISH
Note:
When performing timer playback using another unit connected to the
iPod terminal or AUDIO IN socket, select "iPod" or "AUDIO IN" in step 8.
This unit will turn on or enter the power stand-by mode automatically.
However, the connected unit to AUDIO IN socket will not turn on or
off.
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE CALL" or "DAILY CALL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE OFF" or "DAILY OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
"ONCE ON" or "DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
E-31
or button to select
or button to select
or button to select
or button to select
or button to select
or button to select

Sleep operation

The radio, compact disc and iPod can be turned off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press
the or button
to select "SLEEP", and
press the MEMORY button.
4
Press the or
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
button to select the time.
1-minute intervals
or button to select