Advanced Cd Or Mp3/Wma Disc Playback - Sharp XL-DK257NH Operation Manual

Advanced CD or MP3/WMA disc playback (continued)
XL-DK257NH
ENGLISH
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
the MEMORY button on the
remote control to enter the
programming save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
3
Press the MEMORY button to
save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the (CD ) button.
The total number in memory will
appear.
6
Press the /
E-19
Selected track number
button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control whilst the "MEMORY"
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
or button.
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or
MP3/WMA folder programmed:
Only tracks in the same folder can be select. Select which folder to
be progammed before entering programme mode. (refer page 21 to
select folder)
Notes:
When a disc ejected, the programme is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.
button.