Table of Contents
Advertisement
5.
Move flammable and explosive mate-
rial at least 35 feet from the welding
arc to prevent welding sparks or mol-
ten metal from starting a fire. Keep a
type ABC fire extinguisher within easy
reach. Thoroughly clean the object
being welded of any paint, grease, or
other foreign material.
6.
If working on a wall or ceiling prevent
ignition of combustibles on the other
side by moving them to a safe loca-
tion.
7.
Industrial applications must follow
OSHA guidelines.
8.
ANSI-approved personal safety
clothing and safety devices reduce
the risk for injury.
9.
Leather leggings, fire resistant shoes
or boots should be worn when using
this product. Do not wear pants with
cuffs, shirts with open pockets, or
any clothing that can catch and hold
molten metal or sparks.
10.
Keep clothing and work surfaces free
of grease, oil, solvents, or any flam-
mable substances. Wear dry, insulat-
ing gloves and protective clothing.
11.
Wear an approved head covering
to protect the head and neck. Use
aprons, cape, sleeves, shoulder cov-
ers, and bibs designed and approved
for welding and cut ting procedures.
12.
When welding/cutting overhead or in
confined spaces, wear flame resistant
ear plugs or ear muffs to keep sparks
out of ears.
SKU 98233
Prevent eye
injury and
burns. Wearing
and using
For technical questions, please call 1-800-444-3353.
13.
Prevent accidental fires.
Remove any combustible
material from the work
area.
14.
When possible, move the work to a
location well away from combustible
materials. If relocation is not pos-
sible, protect the combustibles with a
cover made of fire resistant material.
15.
Do not use near degreasing or paint-
ing operations.
16.
Enclose the work area with portable
fire resistant screens. Protect com-
bustible walls, ceilings, floors, etc.,
from sparks and heat with fire resis-
tant covers.
17.
Do not weld or cut on materials hav-
ing a combustible coating or combus-
tible internal structure, as in walls or
ceilings, without an approved method
for eliminating the hazard.
18.
After spot welding, make a thorough
examination for evidence of fire. Be
aware that easily-visible smoke or
flame may not be present for some
time after the fire has started. Pro-
vide adequate ventilation in work
areas to prevent accumulation of
flammable gases, vapors, and dust.
Do not apply heat to a container that
has held an unknown substance or a
combustible material whose contents,
when heated, can produce flam-
mable or explosive vapors. Clean
and purge containers before applying
heat. Vent closed containers, includ-
ing castings, before preheating, weld-
ing, or cutting.
19.
Do not touch live electrical parts.
Wear dry, insulating gloves. Do not
touch electrode or conductor tong
Page 6
Hide quick links:
Advertisement
Table of Contents
