Washing And Drying - Siemens WK12D320EE Installation And Operating Instructions Manual

Washing and drying

Washing only
Drying only
Washing and drying
 Set the programme selector to the desired programme,
e.g. resistentes/algod. (Cottons)
– 0 (Remaining time) and the recommended load in kg are shown
alternately on the display panel. The ! symbol flashes.
 If necessary, adjust the spin speed and select any washing options for
your individualised programme → page 13.
– The secar
ˆ
i
 Load the laundry → page 8.
– Observe the maximum load,
Programme table → page 28.
 Press the inicio/pausa (Start/Pause) button.
– 0 (Remaining time) is shown in the display.
The ! (Programme start) symbol lights up.
– The washing programme starts.
 Set the programme selector to the desired drying programme.
– The display panel alternately shows 0 (remaining time) and the
recommended load in kg.
 Press the secar
 Load the laundry → page 8.
– Observe the maximum load,
Programme table → page 28.
 Press the inicio/pausa (Start/Pause) button.
– 0 (Remaining time) is shown on the display panel and the
! symbols light up.
– The drying programme starts.
Successive washing and drying.
 Set the programme selector to the desired programme,
e.g. resistentes/algod. 60°C.
– 0 (Remaining time) and the recommended load in kg are shown
alternately on the display panel. The ! symbol flashes.
 If necessary, adjust the spin speed and select any washing options for
your individualised programme → page 13.
 Press the secar
 Load the laundry → page 8.
– Observe the maximum load in kg,
Programme table → page 28.
 Press the inicio/pausa (Start/Pause) button.
The drying programme that is carried out is automatically determined by
i
the washing programme, see the Programme table → page 28.
(dry) function must not be activated.
(Dry) button to set the drying time → page 14.
ˆ
(Dry) button to set the drying time → page 14.
ˆ
and
ˆ
15