Gigaset S820 User Manual page 11

Setting up the base and handset – installation wizard
The installation wizard starts automatically the first time your handset is connected to the base
after switching on or after registration. It helps you to configure the following key settings on the
handset and base. These keys are required for operation:
u
Time and date
u
Display language
u
Country in which the phone will be used
u
Your own area code
Note: some fields will not be displayed if your handset is registered with a base that has already
been configured.
Welcome
Time
00:00
Date
01.04.2012
Display Language
Ελληνικά (el)
Country
Greece
Skip
Settings Settings
Date and Time
Time
00:00
Time Format
24 hrs
Date
01.04.2012
Date Order
Day Month Year
Skip
Settings Settings
el en
If you want to adjust the settings at a later date:
¤
Touch the Skip Settings option at the bottom of the
display
The handset then switches to idle status.
You can configure the settings at any time using the
Settings menu on your handset.
To configure the settings:
¤
Touch the Time field to configure this setting
Save
The Date and Time submenu opens.
Set the
-
-
-
-
by touching the fields in sequence and adjusting the set-
tings (see the following illustrations).
Save
Time
Time Format (12 hrs/24 hrs)
Date
Date Order (Day Month Year/Month Day Year)
Getting started
9