NEVER disconnect the StoreJet
LED is flashing.
Removing the StoreJet
1. Select the Hardware
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
3. A message window will appear stating, The 'USB Mass Storage Device' device can now be safely
removed from the system. Unplug the StoreJet
WARNING! To prevent data loss, always use this procedure to remove the StoreJet
®
Windows
2000, XP and VISTA.
Removing the StoreJet
Drag and drop the Disk icon that represents your StoreJet
™
StoreJet
3.5 from the USB port and turn off its power switch.
Removing the StoreJet
Execute umount /mnt/Storejet to un-mount the device. Then unplug your StoreJet
port and turn off its power switch.
Disconnecting from a Computer
™
from a Computer, or turn off the power switch when its
™
3.5 in Windows
icon on the system tray.
Figure 12. Safely Remove Hardware
Figure 13. Safe to Remove Hardware
™
3.5 in Mac
™
3.5 in Linux
®
2000, XP and VISTA
™
3.5 and turn off its power switch.
™
OS 9.0, or Later
™
3.5 into the trashcan. Then unplug your
™
Kernel 2.4, or Later
13
™
from
™
3.5 from the USB