Driver Installation; Driver Installation For Windows ® 2000, Xp And Vista; Driver Installation For Mac ™ Os 9.0, Or Later; Driver Installation For Linux ™ Kernel 2.4, Or Later - Transcend StoreJet 3.5 User Manual

Driver Installation for Windows
No drivers are required. These Windows
™
StoreJet 3.5. Plug your StoreJet
™
StoreJet 3.5 enclosure's power jack and connect the power cable to the adapter, then turn on the unit's
power switch. Windows will install the necessary files and a new Local Disk drive with a newly assigned
drive letter representing the StoreJet
Driver Installation for Mac
No drivers are required. Plug your StoreJet
™
to the StoreJet 3.5 enclosure's power jack and connect the power cable to the adapter, then turn on the
unit's power switch and your computer will automatically detect it.
Driver Installation for Linux
No drivers are required. Plug your StoreJet
™
StoreJet 3.5 enclosure's power jack and connect the power cable to the adapter, then turn on the unit's
power switch and mount it.
1. First create a directory for the StoreJet
Example: mkdir /mnt/Storejet
2. Then, mount the StoreJet
Example: mount –a –t msdos /dev/sda1 /mnt/Storejet

Driver Installation

®
2000, XP and VISTA
®
Operating Systems have built-in drivers to support the
™
into an available USB port. Connect the Power Adapter to the
™
3.5 will appear in the My Computer window.
™
OS 9.0, or Later
™
3.5 into an available USB port. Connect the Power Adapter
Figure 8. Mac Driver Installation
™
Kernel 2.4, or Later
™
3.5 into a USB port. Connect the Power Adapter to the
™
3.5.
™
3.5.
10