Table of Contents
Advertisement
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / web_server.fm / 02.03.2007
Router Web configurator
You can use the router Web configurator to configure the base station router.
u
Save your Internet access data (page 70) and the address for your DNS server (page 77)
on your router.
u
Activate and configure NAT (page 74) and firewall for the router (page 73).
u
Activate the Quality of Service for the router (page 77).
u
Activate/deactivate the DHCP server for your router (page 79).
u
Select the time server and time zone (page 80).
u
Make the settings for the remote management of the router (page 81) and change the
router password (page 81).
u
Load the firmware updates onto the router.
Connecting the PC to the router Web configurator
Precondition: The settings of an available PC firewall allow the PC and base station to com-
municate with each other.
¤
Launch the Web browser on your PC.
¤
In the Web browser address field, enter the IP address or name of the base station
router, e.g.
http://192.168.1.1 or http://router.gigaset (default setting)
¤
Press the return key.
A connection is established to the base station router's Web configurator.
Please note:
You can find out how to change the name router.gigaset on page 80.
Login
Once you have successfully established the connection, the
displayed in the Web browser.
The language in which the menus and the dialogues for the router Web configurator are
displayed is preset by the firmware.
¤
Enter the password for your base station router in the bottom field of the Web page
(default setting: 0000) to access the router Web configurator functions.
¤
Click OK.
Once you have successfully logged in, a
configurator.
68
Connecting the PC to the router Web configurator
Login
opens with general information on the Web
Home
Web page will be
Advertisement
Table of Contents
