Connecting To A Computer - Transcend StoreJet 25H2 User Manual

Connecting to a Computer︱
If you want to use the StoreJet 25 as an external hard drive to upload/download data to and from
your computer, you will need to connect it to a USB port on the computer using the provided USB
Y-cable.
Mini USB 2.0
Connector
StoreJet 25H2 Mini USB port
1.
Plug the small end (1) of the USB Y-cable into the Mini USB port on the StoreJet 25.
2.
Plug the large end of the cable into an available USB port on your desktop, or notebook
computer.
NOTE: Always plug both large ends (2)(3) of the Y-cable into your computer. If only
one USB port is available, please connect the data transfer end (2) of the
Y-cable (compatibility not guaranteed).
USB 2.0 Cable
Figure 2: Mini USB to Standard-A USB cable (USB Y-cable)
Figure 3: Connecting to a Computer
USB 2.0 Port
7
Power
Connector
USB 2.0
Connector