Reminders - Transcend StoreJet 25H2 User Manual

Please use the Mini USB to USB A-Type cable that came with the StoreJet 25 to
connect it to a computer, and always ensure that the cable you are using is in good
condition. NEVER use a cable that is frayed or damaged.
Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.
If you have connected all ends of the USB cable and still have power-related problems
while reading / writing data, we recommend that you purchase a Transcend USB Power
Adapter (TS-PA2A) to provide the power necessary to operate the StoreJet 25.

Reminders

Always follow the procedures in the "Disconnecting from a Computer" section to
remove the StoreJet from your computer.
Both ends of the USB 2.0 Y-cable should
be connected to provide ample power to
the SH25H2
5