Setting Up The Dvr With A Tv Monitor; Dvr/Camera Connections; Dvr/Tv Monitor Connection - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

setting up the dvr with
a tv mOnitOr

dvr/camera cOnnectiOns

Figure 5 below shows the cable con-
nections for the DVR and cameras.
Camera
6
4
Camera
Cable Splitter
Cable
bnc
connector
Figure 5
To connect the camera and power
components to the DVR:
1. Attach the Power Cord to the Power
Adapter.
2. Attach the Power Adapter Cable to
the single end of the Cable Splitter.
3. Attach the connector marked "DVR
Power" to the Power Input Jack on
the back of the DVR.
4. Working with one Camera Cable, at-
tach the yellow video BNC Connector
SKU 67139
Power Cord
DVR
1
3
2
5
Power Adapter
4a
4b
For technical questions, please call 1-800-444-3353.
(the largest connector on the cable)
to one of the camera connections
on the back of the DVR (CH1, CH2,
CH3, or CH4). To attach the BNC
Connector:
a. Align the slots on the BNC Connec-
tor with the pins on the DVR connec-
tion and push the BNC Connector in
so the pins slide into the slots.
b. Turn the connector clockwise to lock
the pins in place.
5. Attach the black power connector at
the BNC end of the same cable to
one of the remaining Cable Splitter
connectors.
6. Attach the connectors at the other
end of the Camera Cable to the same
color connectors of one of the Cam-
eras.
7. Repeat steps 4 through 6 for each of
the other three Cameras and Camera
Cables.

dvr/tv mOnitOr cOnnectiOn

You will initially need to connect
the DVR to a TV monitor in order to
adjust the settings regardless of your
final intended set up. To hook up to a
TV, such as the Monitor (SKU 66556,
sold separately), plug the BNC con-
nector of the video cable into the
Video Output slot, and the other end
into the video Input or channel slot
on the TV monitor. Plug the TV into a
wall outlet. The unit will power up.
note: For model 66556, if needed, change
the channel on the front of the
monitor so the light on the monitor is
green and adjust the image using the
adjustment knobs on the back of the
monitor.
rev 10h
Page 11