Bunker Hill Security 67139 Set Up And Operating Instructions Manual page 37

problem possible causes
Cannot 1. Port forwarding not
access DVR completed.
remotely.
2. Incorrect IP address.
3. Firewall protection
hindering access.
4. Proxy not specified.
Buzzer One or more of the
sounding cameras are not
connected.
Poor quality 1. If viewed on TV
images screen, TV settings
Camera settings need
adjusting.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
SKU 67139
1. Complete port forwarding procedures to set up the modem
for port forwarding. If needed, consult online information or
a qualified computer technician to complete this task. You
will need to obtain the external IP address of the modem to
complete this step.
2. Check for correct external IP address.
3. Check firewall settings.
4. Add to allowed IP addresses.
Check that all the camera wiring is completely plugged in at all
connection points.
1. Through the Main Menu check that
a.
b.
c.
For technical questions, please call 1-800-444-3353.
likely solutions
Record Framerate - Adjust frames per second.
Video Quality - Increase to Highest setting.
Misc. Setup - Adjust the Image Parameters for clearest
image.
rev 10h
Page 37