Global Positioning System (Gps); Brightness/Contrast/Mode; Setting The Clock - Cadillac 2013 CTS Owner's Manual

Press this screen button to change
the brightness, contrast, and mode
of the display.
Press the + (plus)
or (minus) screen buttons to
increase or decrease the brightness
of the screen.
Press the + (plus) or
(minus) screen buttons to increase
or decrease the contrast of the
screen.
Press to
automatically adjust the screen
background depending on exterior
lighting conditions.
Press to make the map
background brighter.
Press to make the map
background darker.
The dimming change button on the
navigation faceplate is used to
toggle between these dimming
modes.
The navigation system time and the
analog clock are separate features.
Changing the time through the
navigation system will not change
the time on the analog clock and
vice versa. See Analog Clock in
the owner manual.
To set the time:
1. Press the CONFIG control
button to enter the menu
options, then press the CONFIG
control button repeatedly until
the time is selected or press the
clock screen button located in
the upper right corner of the
screen.
2. Press the Hours and Minutes
(minus) and + (plus) signs to
decrease and to increase
the time.
Select the 12
HR screen button for standard time;
select the 24 HR screen button for
military time.
the + (plus) or (minus) display
buttons to increase or decrease the
MM, DD, and YYYY date display.
Press either
the On or Off display buttons. If On,
the GPS update feature
automatically updates the date
and time.
Press either the
On or Off display buttons. Press On
to jump ahead for daylight savings
time. Press Off to fall back out of
daylight savings time.
Auto GPS Update
must be off before the time zone
can be changed. Select the change
display button to select the desired
time zone.
The navigation system determines
the position of the vehicle by using
satellite signals, various vehicle
signals, and map data.
Press