Removing The Propeller - Yamaha F9.92D Owner's Manual

Checkpoints
Check each of the propeller blades for
G
wear, erosion from cavitation or ventila-
tion, or other damage.
Check the propeller shaft for damage.
G
Check the splines / shear pin for wear or
G
damage.
Check for fish line tangled around the pro-
G
peller shaft.
Check the propeller shaft oil seal for dam-
G
age.
NOTE:
If the shear pin equipped: it is designed to
break if the propeller hits a hard underwater
obstacle to help protect the propeller and
drive mechanism. The propeller will then
spin freely on the shaft. If this happens, the
shear pin must be replaced.
EMU30660

Removing the propeller

ZMU02059
EMU29194
Spline models
1. Straighten the cotter pin and pull it out
using a pair of pliers.
2. Remove the propeller nut, washer, and
spacer (if equipped).
ZMU01897
1. Cotter pin
2. Propeller nut
3. Washer
4. Propeller
5. Thrust washer
3. Remove the propeller and thrust wash-
er.
EMU29212
Dual thrust models
1. Straighten the cotter pin and pull it out
using a pair of pliers.
Maintenance
1
2
3
4
5
ZMU02062
66