Connecting To The Mains Power Supply; Checking The Operating State; Making The Basic Settings - Gigaset 504 AGU Instruction Manual

Installing the device

Connecting to the mains power supply

Please remember:
Only use the mains adapter supplied with the device (9 V DC, 1 A).
ì
Connect the mains adapter cable to the POWER socket on the router.
ì
Plug the mains adapter into a mains socket.
ì
Switch on the device.
The router is now switched on and ready for operation.

Checking the operating state

Your router Gigaset 504 AGU is now ready for use. The LED displays on the front panel
of the router provide information about the operating state (see page 8).
When the device is ready for use, the LEDs light up as follows:
u
The Power LED on the front lights up.
u
The ADSL LED flashes to indicate that the DSL connection is being synchronised.
Once this process is complete, the ADSL LED lights up permanently.
u
The LAN LEDs light up if a device is connected to the corresponding LAN port.
u
The USB LED lights up if a device is connected to the USB port.
If this is not the case, refer to the section entitled Troubleshooting on (page 62).

Making the basic settings

You can now make the basic settings for Internet access using the user interface of the
router (page 18).
16