System Password - Gigaset 504 AGU Instruction Manual

Administration
Internet Time
The System time of the device is automatically synchronised with the time server on
the Internet. The time of the Last synchronization with time server is displayed for
your information.
ì
If you would like to use your own time server, activate the On option next to the Use
custom time servers field.
ì
Enter the Internet address of the time server in the Preferred time server or Alter-
nate time server fields.
ì
Click OK to apply the settings.

System Password

You can assign a System Password to the user interface of the router Gigaset 504 AGU
and specify the period after which a session is to be automatically ended if no further
entry is made.
ì
In the Advanced Settings menu, select: Administration – System Password.
After installation, the user interface of the router is protected by the System Password
admin. To prevent unauthorised changes being made to the configuration, you should
set a new System Password from time to time.
ì
Enter the old System Password in the Current password field.
ì
Enter a new System Password in the New password field and repeat it in the
Confirm new password field.
The System Password may contain up to 20 characters. The System Password is case
sensitive. Avoid proper names and all too obvious words. Use a combination of letters,
digits and special characters.
Note
If you forget your System Password, you have to reset the router Gigaset 504 AGU
(page 10). This returns all your settings to the factory configuration. This means the
system password is changed back to admin.
50