Caller Id (Kx-Mb2025/ Kx-Mb2030 Only); Caller Id - Panasonic KX-MB2010FR Operating Instructions Manual

7. Caller ID (KX-MB2025/KX-MB2030 only)

7.1 Caller ID

For Caller ID service availability, contact your
telephone company.
This unit is compatible with the Caller ID service
offered by your local telephone company. To use this
unit's Caller ID features, you must subscribe to a
Caller ID service.
Important:
R This unit is designed in accordance with the ETS
(European Telecommunication Standard) and
only supports the basic CLIP (Calling Line
Identification Presentation) features.
R This unit will only display the caller's telephone
number and name.
R This unit will not support future additional
telephone services.
R Depending on the service of the local telephone
company, the date/time of the call or the caller's
name may not be displayed.
Make sure the following ring count is set to 2 or more
rings beforehand.
– FAX ring count (feature #210 on page 62)
– TEL/FAX ring count (feature #212 on page 65)
R The name display service may not be available in
some areas. For further information, please contact
your telephone company.
7.1.1 How Caller ID is displayed
The calling party's name or telephone number will be
displayed after the 1st ring. You have the option of
whether or not to answer the call.
The unit will automatically store caller information (name,
telephone number and date and time of the call) from the
30 most recent calls. It is possible to view caller
information one at a time on the display (page 57) or
print the entire Caller ID list (page 103).
1
When an outside call is received, the caller's
telephone number can be received automatically.
You do not need to press any buttons.
2
Lift the handset to answer the call.
Note:
R When caller information is received and it matches a
telephone number stored in the unit's one-touch dial
or phonebook, the stored name will be displayed.
R If the unit is connected to a PBX (Private Branch
Exchange) system, caller information may not be
received properly. Consult your PBX supplier.
R If the unit cannot receive caller information, the
following will be displayed:
"OUT OF AREA": The caller dialled from an area
which does not provide Caller ID service.
"PRIVATE CALLER": The caller requested not to
send caller information.
"LONG DISTANCE": The caller made a long distance
call.
56
To confirm caller information by printing the Caller
ID list
– To print manually, see page 103.
– To print automatically after every 30 new calls,
activate feature #216 (page 62).