Panasonic KX-MB263HX Operating Instructions Manual page 61

Feature/Code
Changing the fax activation
code
{#}{4}{3}{4}
Changing the silent fax
recognition ring setting
{#}{4}{3}{6}
Setting the memory reception
alert
{#}{4}{3}{7}
Setting friendly reception
{#}{4}{3}{8}
Receiving a fax into the
computer
{#}{4}{4}{2}
Setting the computer for PC
fax reception
{#}{4}{4}{3}
(KX-MB783 only)
Selection
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} "OFF"
{1} "ON" (default)
1. {MENU} i {#}{4}{3}{4}
2. Press {1} to select "ON". i {SET}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
4. {SET} i {MENU}
To change the number of times the unit rings while in TEL/FAX mode.
{3} "3" (default)
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L See page 49 for details.
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{0} "OFF": You have to press {START} for fax reception.
{1} "ON" (default): You do not have to press {START} for fax reception.
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
{0} "OFF": Deactivates this feature.
{1} "ALWAYS": If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{2} "CONNECTED" (default): If the unit recognizes the connection to the
computer, it will transfer a received document to the computer. If the unit cannot
recognize the connection, it will print out the data.
To select the computer that will be used for receiving a fax. See page 27 for
details.
9. Programmable Features
61