Sanding Curved Edges - Central Machinery 38123 Assembly And Operating Instructions Manual

Harbor freight tools assembly & operating instructions combination 4 x 6 inch belt sander 38123

Table of Contents

Sanding Methods: End Sanding On The Sanding Belt:

FIGURE N

Sanding Methods: Sanding Curved Edges:

FIGURE O

WORKTABLE

(35)

NOTE: The Sanding Belt is designed to rotate down towards the table. The Sanding Disc

rotates up from the table and down towards the table.

When Sanding, always hold the workpiece securely, with two hands if possible, and keep

hands and fingers away from all moving parts on the tool. Whenever possible, use the

Backstop (9) and Worktable (35) on the machine; they will allow you to work more

safely, more accurately, and with less fatigue.

Caution: Sanding against the direction indicated on the disc is hazardous and could

result in personal injury.

SKU 38123

For technical questions, please call 1-800-444-3353.