Lenovo ThinkCentre E73 Hardware Maintenance Manual page 91

• If you are replacing an old PCI Express card, grasp the old card that is currently installed and gently
pull it out of the slot.
Figure 15. Removing a PCI Express card
Notes:
a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
disengage the latch. Grasp the card and gently pull it out of the slot.
5. Remove the new PCI Express card from its static-protective package.
6. Install the new PCI Express card into the appropriate slot on the system board. See "Locating parts on
the system board" on page 72.
Note: If you are installing a PCI Express x16 graphics card, ensure that the memory slot retaining clips
are closed before you install the graphics card.
5
6
3
4
.
Chapter 9 Replacing FRUs (machine types: 10AS and 10AU)
1 as shown to
87