4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
Figure 63. Pivoting the drive bay assembly upward
5. To lower the drive bay assembly, press the drive bay assembly clip
assembly downward as shown.
Figure 64. Lowering the drive bay assembly
Installing or replacing a PCI Express card
Attention:
Do not open your computer or attempt any repair before reading and understanding "Important safety information"
on page 1.
This section provides instructions on how to install or replace a PCI card. Your computer has two PCI
Express x1 card slots and one PCI Express x16 graphics card slot.
.
Chapter 10
Replacing FRUs (machine types: 10AU, 10AW, 10BF, and 10BG)
1
inward and pivot the drive bay
129