Driver
— Select a driver for the printer.
•
Bearer
— Select a bearer for the printer.
•
Access point
— Select the access point.
•
Port
— Select the port.
•
Host
— Define the host.
•
User
— Enter the user.
•
Queue
— Enter the print queue.
•
Orientation
— Select the orientation.
•
Paper size
— Select the paper size.
•
Clock
Select
Menu
Office
> Clock.
>
In Clock, you can view your local time and time zone
information, set and edit alarms, or modify date and time
settings.
Alarm clock
Open the alarm clock tab.
To set an alarm, select
Options
alarm is active,
is displayed.
To switch off the alarm, select Stop, or to stop the alarm
for 5 minutes, select Snooze. If the alarm time is reached
while the device is switched off, the device switches itself
on and starts sounding the alarm tone. If you select
Stop, the device asks whether you want to activate the
device for calls. Select
No
to make and receive calls. Do not select
phone use may cause interference or danger.
Set
alarm. When an
>
to switch off the device or
Yes
when wireless
To change the alarm time, select
alarm.
To remove the alarm, select
World clock
Open the world clock tab to check the time in different
cities.
To add a city to the world clock view, select
Add
city.
To change the city that determines the time and date in
your device, select
is displayed in the Clock main view, and the time in your
device is changed according to the city selected. Check that
the time is correct and matches your time zone.
Clock settings
Select
Options
> Settings.
To change the time or date, select
To change the clock shown in the standby modes, select
Clock type
Analogue
>
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select
Network operator time
update.
To change the alarm tone, select
Yes
Options
>
Options
Remove
>
Options
Set as current
>
Time
or Date.
or Digital.
>
Clock alarm
Reset
alarm.
Options
>
city. The city
Auto-
tone.
69