Panasonic Viera TX-L42WT50E Operating Instructions Manual page 73

To start One Touch Recording
Start
No other channel can be selected while the
recording is in progress.
To stop recording on the way
or
To play back or delete the recorded contents
Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD
Card, it may not be available or the recording may not work properly while playback.)
Record constantly [REW LIVE TV]
(USB HDD only)
Records the current programme constantly.
Confirm the code of the remote control is "73" (p. 31).
Select [Auto] to start [REW LIVE TV]
Recording Setup
REW LIVE TV Auto
To operate [REW LIVE TV]
To pause
After pausing or searching backward, the following buttons are available to operate.
Search backward
Playback / Pause
Search forward
Return to the current programme
To stop [REW LIVE TV]
Recording Setup
Off
REW LIVE TV
Auto
[REW LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:
(Even if [REW LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording will start
automatically in a condition that makes the recording available.)
Selected other channels
‡
Selected locked channel
‡
Selected invalid channel
‡
When both USB HDD and SD Card are available
Select the recording device
Please select recording device
EXIT
OK
Select
RETURN
SD Card
"Recorded TV mode" (p. 81)
When you select [Auto], the recording will
select
start automatically.
access / store This recording will not start if the other
recording is in progress, TV signal condition
is bad or any images are not displayed.
To search backward (up to 90 minutes)
Search backward / Pause /
forward Playback
If you stop [REW LIVE TV], the recorded
select [Off]
content for [REW LIVE TV] will be deleted.
No TV signal
‡
When the other recording starts
‡
When the TV is turned to Standby or off
‡
select
set
USB HDD1
Return to the
Playback
current programme
73