Panasonic Viera TX-L42WT50E Operating Instructions Manual page 46

Menu Item
VIERA Link
HDMI Content Type
AV1 out
Power on Link
Power off Link
Standby Power
Save
Intelligent Auto
Standby
Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel
List
Favourite Network
New Channel
Message
46
Adjustments / Configurations (alternatives)
Sets to use VIERA Link functions [Off] / [On] (p. 99)
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable [Off] / [Auto]
This function is available if the connected equipment supports HDMI Content
Type.
The content type information will be displayed for several seconds when this
function works.
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
Component and HDMI signals cannot be output.
Sets to use Power on Link function [Off] / [On] (p. 98, 99)
Sets to use Power off Link function [Off] / [On] (p. 98, 99)
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 100)
This function is available when [VIERA Link] is set to [On] and [Power off Link]
is set to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 100)
This function is available when [VIERA Link] is set to [On].
Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV
DVB-S and DVB-C channel settings cannot be downloaded.
Applies access control for channels or inputs to prevent unwanted access (p. 61)
Creates a list of favourite channels (p. 54)
Not valid on Analogue mode
Skips the unwanted channels or edits channels (p. 55)
Automatically searches for the receivable channels (p. 50 - 53)
Searches for the channels manually (p. 56)
Updates the channel list while keeping your settings (p. 57)
For DVB mode
Selects your favourite network for each broadcasters (only available in some
countries)
For DVB-C or DVB-T mode
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 57)
For DVB mode