Panasonic Viera TX-L42WT50E Operating Instructions Manual page 72

4
Confirmation to enable USB HDD for recording
If the formatted USB HDD for recording already exists, this confirmation screen will be displayed to switch to enable
this USB HDD for recording.
USB HDD Formatting
Do you want to enable this
device now for recording?
When disconnecting any USB device,
always use the "Safely Remove USB" function
in the USB HDD Device Setup menu to avoid
any corruption of recorded content.
Yes
USB HDD Setup
Product
USB Drive A USB HDD 1
USB Flash Disk
USB HDD name is displayed
To format
(red)
To remove the USB HDD safely from the TV
(yellow)
To set "Safely remove USB" in other conditions
‡
SD Card Formatting
Formats the inserted SD Card.
Please note that all data in the SD Card will be erased after formatting.
Caution and confirmation of using SD Card and start format
SD Card Formatting
Format SD card.
Are you sure?
Yes
select [Yes]
set
If the formatting has failed,
Ensure the SD Card is inserted correctly.
‡
Ensure the write-protection switch is unlocked.
‡
Check your SD Card is suitable for recording.
‡
One touch direct TV recording
Records the current programme in the USB HDD or the SD Card immediately.
Confirm the code of the remote control is "73" (p. 31).
Select the maximum recording time [30] / [60] / [90] / [120] / [180] (minutes)
Recording Setup
One Touch Recording
Default REC Mode
You can select default recording mode for [One Touch Recording].
"Recording time for the USB HDD / SD Card Recording" (p. 111)
[DR]: Direct recording (normal mode)
[LT1]: Long time recording
[LT2]: Extra long time recording
72
No
Mode
Name
: The USB HDD is available for recording / playing back.
: The USB HDD is available for playing back.
To edit USB HDD name
(green)
No
- What you see is What you record
180 minutes
select [Yes]
set
Only one USB HDD on the list is available for recording.
(p. 23)
SD Card Formatting
All data stored on the SD card will be deleted during
formatting. Continue?
Yes
select [Yes]
set
(p. 70)
(p. 111)
select
access / store
To change the mode
No
[One Touch Recording]
LED will turn to orange (flash) while One
Touch Recording is in progress.
"Indicator / Control panel" (p. 12)