Picture And Still Image; Wide Mode - Sharp Aquos LC-40LE530X Operation Manual

EPG (Continued)
Viewing the reminder schedule list
1
Press EPG.
2
Press Y to display the reminder schedule list.
3
Press a/b to display next or previous screen.
4
Press MENU or EPG to exit.
Cancelling the reminder timer
setting
1
Press EPG.
2
Press Y to display the reminder schedule list.
3
Press a/b to select a programme you want to
cancel.
4
Press R to delete a programme from reminder list.
5
Press MENU or EPG to exit.

Picture and still image

You can freeze a motion picture on the Display.
1
Press FREEZE.
• A still image displays.
2
Press FREEZE or RETURN again to exit still
image.
NOTE
• The still image automatically goes out after 30 minutes.
• FREEZE doesn't function for PC input (all resolution).

Wide Mode

Auto Selection
If you set "WSS" and "4:3 mode" in the Setup menu, the
optimum WIDE mode is automatically chosen for every
broadcast containing the WSS information.
"WSS" menu
To enable Auto Selection, set "WSS" in the Setup menu
to "On" (See page 15).
"4:3 mode" menu
To set the type of the wide screen, select "Panorama" or
"Normal" in the 4:3 mode menu (See page 16).
4:3 mode set to "Panorama"
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Manual Selection
You can select different picture sizes that account for the
kind of each picture.
1
Press WIDE.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable for the
type of video signal currently received.
2
Press WIDE or a/b while the WIDE MODE menu
displays on the screen.
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
For 4:3 "standard" pictures. A side bar
Normal
appears on each side.
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
Zoom14:9
also see bars on the top and bottom
with some programmes.
In this mode the picture is progressively
Panorama stretched toward each side of the
screen.
Full For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may
Cinema16:9 appear on the top and bottom with some
programmes.
For 14:9 letterbox pictures. Bars may
Cinema14:9 appear on the top and bottom with some
programmes.
Displays an image with the same number
of pixels on the screen (only when
Dot by Dot
receiving a 1080i/1080p/SXGA/SXGA+
signal)
Display with an Underscan image only
when receiving a 720p signal. Display
Underscan with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
NOTE
• Some picture size may not be displayable depending on the
input signal.
4:3 mode set to "Normal"
Description
23