Sony FD Trinitron WEGA KV-32FV27 Operating Instructions Manual page 18

Use this hookup if:
You subscribe to a cable TV system that scrambles or encodes all
signals, requiring a cable box to view all channels, and
You do not intend to hook up any other audio or video
equipment to your TV.
When all channels are routed through your cable box, only one
unscrambled signal is sent to the TV, so you cannot use the PIP
feature. If some of your channels are scrambled, but others are not,
consider using the hookup "Cable Box and Cable" on page 11
instead.
1 Connect the coaxial connector from your cable smwice to the
cable box's IN jack.
Using a coaxial cable, connect the cable box's OUT jack to the
TV's VHF/UHF
jack.
C,,hle VII U I
x2 _ OUI
C,'l_le box
13