• Calling card
You can store two calling card numbers in your phone's memory.
Save calling card information
1
Press Menu 5 4 2.
2
Scroll to the calling card information you want to change (Card A or
Card B), then press Options.
3
Scroll to Edit, then press OK.
4
Enter your security code, then press OK. (See "Security code" on
page 73.)
5
At Dialing sequence, press Select. Scroll to the dialing sequence your
card uses (see chart below) then press Select..
11
Dialing sequence
Access no.
+ Phone no.
+ Card no.
Access no.
+ Card no.
+ Phone no.
Prefix
+ Phone no.
+ Card no.
The order of the following steps may vary, depending on which
dialing sequence your card uses.
Use for cards
that require you to:
Dial the 1-800 access number,
then phone number, then card
number (+ PIN if required).
Dial the 1-800 access number,
then card number (+ PIN if
required), then phone number.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required).
[ 52 ]