Throttle Valve Handle Clearance Adjustment; Tire Inspection - Sym Citycom 300i User Manual

THROTTLE VALVE HANDLE CLEARANCE ADJUSTMENT

Correct clearance allows throttle vale handle to rotate 2~6mm.
To adjust, first loosen the fixing nut, then turn the adjusting nut
to the proper position and securely tighten the fixing nut.
Throttle Valve Check Items:
Check throttle valve cable to see if it can be moved smoothly
from a closed position to a wide open position.
Rotate steering handle from side to side to check that the
throttle cable is not interfered with.
Check to see if the throttle cable is obstructed by any other
cables preventing it from being operated smoothly.

TIRE INSPECTION

Tires should be checked and inflated with the engine shut off.
If a tire's ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the
specified pressure to meet applicable standard before riding.
Tires pressure must be checked when the tire is cool.
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
Visual check tires for frontal and lateral side walls for
crack or damage.
Visual check tires for any nails or small stones wedged
in the tread.
Check the "tread wear indicator" condition to see if tread
groove depth is insufficient.
A tire with a wear bar showing is worn out and should be
replaced immediately.
WARNING:
Inspect the scooter's tires regularly. Over inflated, under inflated, old, worn or cracked tires can
adversely affect the way the scooter handles and could lead to sudden tire failure. Sudden tire failure
could cause you to lose control of the scooter which could cause an accident and could lead to injury
or death.
Only ride the scooter with properly inflated tires. Always replace old, worn or cracked tires.
10. Inspection and maintenance before riding
18
Adjust nut
Foreign materials
(nails or small stones)
2~6 mm
Lock nut
Crack and
damage
Tread wear
indicator